Hawker Hunter
Royal Air Force Traditional Version

To further protect your valuable purchase we ship All RC Lander Jets
  in Custom Made 200# Test OUTER shipping cartons built to our specifications!

(Does NOT Include transmitter, receiver, servos, fan unit, motor, ESC, battery)

 (Completely Painted with Retracts Included)
Requires Assembly

Now in Super EPO Foam, Metal Base Retracts and Pilot

Special Order with
Operating Flaps, Suspension Strut Retracts, Operating Gear Doors,
LEDF68-1A21 6S Ducted Fan, HobbyWing ESC,
Servos for Control Surfaces, Gear Door for Retracts and MORE!

Special Order with Operating Gear Doors or Suspension Strut Retracts
or Both for just $65.00 more!

For great additional savings
choose Motor, ESC, Battery and other Options at bottom of page before you add to cart!

• Wingspan: 866mm ( 34 in)
• Length: 1157mm ( 45.5 in)
• Flying Weight: 1500g  up ( 50 oz+)

• Function: Retract landing gear system

• Operating Flaps Performance (optional)

• Full scale Retract Gear Door Performance (optional)

• Drive System Required: EDF 68-69mm Ducted Fan with Brushless Motor (3575kv motor or higher - 4S/6S)
• Servo Required: 8 to 10 X 9g high speed micro servos
• Speed Controller Required: 60 or higher amp Brushless Speed Control
• Battery Required: 14.8V 4S 3300mah to 6S 2500mAH 25C or higher Li-Polymer
• Control system Required: 6 CH Multifunctional FM Radio Transmitter and 6 CH Micro Receiver

• Completely Painted with Retractable Landing Gear Included!
• Fully aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible
• The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low
• Powerful ducted fan with brushless motors makes it possible to fly this plane at high speed in the situations with much wind
• Excellent stability of nosing up and down
• One of the best ducted fan jet in the market!
• Steerable nose landing gear
• Ready to Fly in just a couple of hours!
• Super tough, lightweight airframe!
• Scale appearance, great attention has been given to details
• Shock Resistant Reinforced Fuselage and Strong Wings
• Can Take Off From Ground or can be Hand Launched
• Ground Take-Off can be performed easily
• Excellent Flight Performance
• Super easy and super stable electric powered scale R/C park flyer for middle-level users to advanced-level users.
• Stable inverted flight
• Superb Quality, Simply the Best RTF Jet you can find!!!
• Super stable, Super low speed for safety, Super low altitude for fun
• Fabricated by accurate molds with high fidelity of real airplane
• One of the Best Looking Jet in the market 
• Excellent stability and aerobatic capability
• Detailed Body Structure
• High roll rate
• Slow Speed Flying Capable
• Suitable for experienced pilots
• Approximately 5-15 minutes flight time on each charge Li- poly battery will help to achieve better performance and longer flight time.

• Easy to Assemble

• Required to Complete:
    6channel transmitter and 6 channel radio
    Ducted Fan Unit and Brushless Motor
    60 or higher amp ESC
    9 gram x 8 to 10 servos
  ( 2 pcs Aileron, 1 pc Elevator, 1 pc Nose Steering & Rudder, 2 pcs Flaps, 4 pcs Gear Doors OR 3 pcs-Retracts without Gear Doors )
    14.8V 4S 3300mah or higher LiPo Battery

airframe, retracts and Pilot
only $129.95
 USPS Shipping fee applied at checkout
(Canada, Hawaii, Alaska, Guam, Puerto Rico, Europe extra)

Hawker Hunter Operations Manual
 

68 mm EDF Units at a Glance   Material: Weight: Rotor Max rpm Application Thrust LEDF68-1AP39 Aluminum Alloy, Metal special 202g 68mm dia., 5-bladed 40,000rpm 200-500w 3900kv up to 780g 11.1V 3S LEDF68-1A43 Aluminum Alloy, Metal special 240.8g 68mm dia., 5-bladed 45,000rpm 200-700w 4370kv up to 1.2kg 11.1V 3S LEDF68-1A39 Aluminum Alloy, Metal special 202.2g 68mm dia., 5-bladed 40,000rpm 200-500w 3900kv 14.8v 4s: 1.1kg 11.1v 3s: 780g LEDF68-1A35 Aluminum Alloy, Metal special 245g 68mm dia., 5-bladed 47,000rpm 200-700w 3575kv up to 1.4kg 14.8v 4S LEDF68-1A21 Aluminum Alloy, Metal special 242g 68mm dia., 5-bladed 47,000rpm 200-700w 2399kv up to1.6kg                 22.2v 6s

Factory Installed RCLander Servos at a Glance all operating voltage 4.8 - 6.0 volts with Futaba, JR Plugs Servo Model Special Features Weight: Size Speed / Stall @ 4.8 Volt Speed / Stall @ 6.0 Volt Recommended Application LANDER LS-1 No Special Features Sold as Economy Servo by most competitors with factory installed features - Not recommended for Gear Doors or Retracts Retail: $5.95 each 8.0g (0.28 oz) 22.5X12.8X23.3mm (0.88x0.50x0.92in) Speed: 0.15 sec/60° at no load Stall:  ≥1.0 kg. cm (14.0 oz/in) Speed: 0.17 sec/60° at no load Stall:  ≥1.2 kg. cm (16.8 oz/in) Economy Servo Control Surfaces Only! Aileron, Rudder, Elevator NOT recommended for Retracts, Steering or Gear Doors LANDER LS-2 Carbon Fiber Gears with Ball Bearings Retail: 12.95 each 9.0g (0.32 oz) 23x11.8x25.6mm Speed: 0.12 sec/60° at no load Stall:  ≥1.8 kg. cm (25.02 oz/in) Speed: 0.10 sec/60° at no load Stall:  ≥2.0 kg. cm (27.08 oz/in) Better Duty Life The Minimum recommended for Control Surfaces and MINIMUM required for Gear Doors  and Retractable Gears All have a Standard Direction of Counter Clockwise / Pulse Traveling 1500 to 1900u sec All have PWM Input  Range: Pulse Cycle 20 ±2ms, Positive Pulse 1~2ms